(1) Machine induction:
This Brushless motor needle winding machine is designed for the BLDC external armature rotor coil winding. The armature coil winder adopts double-position needle-type outer winding design. Customers can set parameters according to their own needs, such as automatic winding, multi-wire winding, Automatic indexing, automatic spanning, winding speed, etc.; Each action cycle will wind 2 BLDC rotor at the same time.simple operation and high production efficiency.
(2) Technical parameter:
BLDC armature rotor coil winding machine/ Needle winder
BLDC Armature I.D.:
20-80mm (Other specifications can be specially designed)
BLDC Armature O.D.:
50-120mm(Other specifications can be specially designed)
BLDC Armture stack length:
100-200mm(Long stroke, special customization)
0.5-1.5mm(Other specifications can be specially designed)
Applicable pole number :
Motor winding mechod :
Winding stations :
Spindle speeds :
0--300 RPM (adjustable)
Two 4.4KW Indexing Motor
One 3KW Winding Motor with Brake
750W or so two wiring motor
380V/50HZ Three phase four wires
1200*1360*1800mm (Length * width * height) Does not include wire rack
The motor rotor needle winding machine is suitable for outer rotor winding of brushless motor in many fields such as HM, medical equipment, household appliances and electric vehicles.
(4)Function and Characteristics:
1. The motor needle winding machine is sutiable for multi-pole BLDC armature coil winding. Manual loading and unloading, automatic clamping, winding and shearing.
2. The frame adopts thickened 4080 aluminum profile, and the table plate adopts cast iron to absorb vibration, even when winding at high speed, the vibration is very small.
3. Tooling and fixture parts adopt downward positioning mode, stable positioning and reliable tightening.
4. Wire clamping and wire cutting, line part structure compact, wire clamping and wire cutting is completed at one time;
5. Different stator and winding parameters can be quickly switched through the HMI to adapt to different stator requirements.
6. Quick change-overof tooling;(20 minutes with proficiency)
7. Full aluminum alloy protection
8. PLC control, fault display
9. The wire tightness is moderate, no injury, no breakage, ect.
10. The salt test of the product is carried out within 10 mA in one minute.
11. Equipment safety index: accord with CE standard.
12. Efficiency: 120 rev / min.
13. Beat: 5 minutes / BLDC rotor.
14. Noise: 60-70 decibels or less.
(5) Picture show
1.The BLDC rotor coil needle winding machine show
2.The bldc armature winding machine show