|Payment & Shipping Terms ||Supply Capacity |
|Unit Price:||0.5 USD||Production Capacity:||1000000|
|Trade Term:||FOB,CFR,CIF,FCA,EXW||Packing:||Wooden case which is...|
|Payment Terms:||L/C, T/T||Delivery Date:||35 days|
|Min. Order:||1000 Piece/Pieces|
|Means of Transport:||Ocean, Air, Land|
Electric motor thermal protector for motor
BR-A1D. BW series thermal protector is an automatic temperature recovery device. It is installed in series with the motor coil. Therefore, the thermal protector will respond to the temperature change and motor current. The heat caused by temperature and current raise will transmit to bimetallic element. Once the preset temperature is reached, the bimetallic element will react and make contactor cut off. Then the circuit will be cut off. Once the motor temperature decreases to the rated recovery temperature, bimetallic element will recover to the initial station. Then the contactor will close and the circuit will reconnect.
Open temperature: 50~150±5℃, one gear per 5℃
Reset temperature: it is 2/3 of standard opening temperature or specified by customers. The tolerance is 15℃.
They are applicable for more than 5000 cycles under following condition.
The thermal protector can not sustain heavy impact during working.
The word side is the temperature sensing surface.
Information needed for thermal protector inquiry
It will be better if customer could send us detailed drawing including below information.
1. Thermal protector dimension: length, height, width, tolerance, lead wire length.
2. Thermal protector open temperature
3. Thermal protector recovery temperature
4. Thermal protector applications
5. Required quantity
6. Other technical requirement.
Electric motor thermal protection switch
Category: Thermal protector
Related Category: Insulation material
Electric Motor Commutator
Motor armature Shaft