Five-working station Generator Armature Automatic Balancing Machine

Model: ND-BFZSZ-5L-A
Place of Origin: Zhejiang,China (Mainland)
Balancing speed: 1500-2200rpm
Working station: Five
Power: AC380V
Cycle time: 25-30s
Machine size: 2200 x 1700 x 1800 mm
Cerfificate: CE
Application: generator

inquiry

skype basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Unit Price:50000.0 USDProduction Capacity:100 sets
Trade Term:FOB,CIFPacking:Wooden case which is...
Payment Terms:L/C, T/TDelivery Date:60 days
Min. Order:1 Piece/Pieces
Means of Transport:Ocean


 (1)Technical Parameter:

 

Main

components

configuration

Cylinder: SMC

Servo motor: Mitsubishi

Sensor: KEYENCE,OMRON,CONTRINEX

LCD touch screen: KEYENCE

Control PLC: KEYENCE KV-3000

Stepping motor: Oriental Motor

Armature Diameter

Stack height: 30-100mm

Armature diameter: Φ80~115

Balancing speed

1500-2200rpm

Milling method

Drilling

Power

AC380V

Air supply

0.4~0.6Mpa

Cycle time

25-30s

Residual unbalance

eccentricity

Better than the national standard for Grade 6.3

Volume

(length x width x height)

 

2200 x 1700 x 1800 mm


(2) Application

The automatic rotor balancing machine is suitable for generator.


(3) Machine function and characteristic

For this type of Five station Armature Balancing Machine, armature does not need to mark, directly put on the conveyor, there are 5 working stations: loading and unloading station, initial measuring station, left side cutting station, right side cutting station and remeasuring station. High efficiency and precision.PLC controlled, all the data can be set on the touch screen.


Machine consist by idle station (station0), initial test station (station1), commutator end processing work bench (station 2), shaft end processing work bench (station3) and retest station (station 4) such five station in total. Besides, it is also include five machine hands,transportation line,drilling main shaft and dividing devices.

Armature balancing machine station picture

The procedure of single circle runs as following:

Transportation line take generator armature to idle station (station 0);


Machine hands transport it from idle to initial test station (station 1) to measuring original unbalance mass, positioning the right place and depth before process.


Machine hands move armature to next station (station 2) in order to process imbalance amount of commutator end.


Machine hands move generator armature to next station (station 3) in order to process imbalance amount of shaft end. Before that, machine hand will turn 180 degrees of armature to lead shaft end out towards.


Machine hands move product to retest station (station 4), measuring the permissible residual unbalance. Before that, machine hand will turn 180 degrees of armature to lead shaft end inner towards.


Machine hands move product back to original station (station 0), while the armature is qualified after test, machine will pick up next one from idle station to start another round processing, good one will come back to transportation line. If the result is not within permissible residual unbalance, system command the machine come back to the first stage and restart a copy. There are five stations in this machine, so it is possible to process five pieces in the mean time.


Production Cycle time:

The way of process is radial drilling method, use F6~ 8 driller; the cycle time 25 to 30 seconds per unit in condition of initial unbalance amount within 300gmm.


Armature balancing machine working station picture


Rotor sample for this balancing machine

Category: Armature balancing machine

Related Category: Armature winding machine  Insulation paper inserting machine  Commutator pressing machine  End cover pressing machine  Shaft pressing machine 


«
QR Code