This type of automatic stator winding machine is suitable for two-poles stator winding,such as mixer motor,grinder motor,vacuum cleaner motor etc.The stator coil winding mahcine can wind two stators at the same time. The stator winder is self-locked, quick and convenient. Winding parmater can be set and saved through the touch screen.
Function and characteristic:
1. Manually fitting mould,and straining and releasing the mould with hand control lever.
2. Automatically winding
3. Quickly replace the tooling gripper;
4. Travel,tilt angle could be adjusted;
5. The automatic stator winidng machine is easy to set parameters,alarm available.
Main technical parameter:
Stator O.D range
Air supply pressure
Three phase AC380V50/60Hz
Main electrical configuration:
1. Mitsubishi PLC
2. EV4300C GOT
3. Mitsubishi frequency converter
4. Airtec cylinder and air source part
5. Mitsubishi tension control unit or Wanner (at your option)
1. What is the operation procedure of this machine?
A.:Fix the winding tools on stator core,then put stator core on the loading base,press START button,safety door will close,loading base will move inside to the winding position, machine will automatic winding and cut wire,at this time,operator could fix the winding tools on another two stator cores;after finishing winding,loading base will move outside,sfatety door opened,then take out the completed stator,and put another two stator cores on the loading base,one cycle is completed.
2.What is the most common malfunction of this machine?
A.: Sometimes,the machine will stop on one certain step,and not continue to running,in this case,there will be error information displayed on the touch screen,usually,the reason is that the sensor of next step is not on the right position,so machine can not continue to next step, just check the sensor position,and adjust it to correct position,then machine will running properly.When adjusting sensor position,please change to Manual mode, and take care of your hands,because once the sensor is adjusted well,machine will have action for one step.
The stator coil winding machine image dispaly
3.The stator winding Machine construction
Pay attention to the controlling system when choosing stator winding machine
When choosing stator winding machine, the most important factor is the operation. Now there are many kinds of similar stator winding machine, but different design will be different on operation, some types has easy operation, while some types are troublesome.
Relatively speaking, the machine with troublesome operation has a lower price, but you will meet problem during operation, namely troublesome operation or need high professional requirement, thus it will need professional technician to operate the machine, and the operation cost is increased.
No matter to use professional technician or give training to normal operator, both of them will increase the operation cost. But if use stator winding machine with simple operation, maybe the price is a little higher, but it will need not professional technician, and training is very simple, so it can save operation cost for motor manufacturers.