The use of automated machinery and equipment has replaced the traditional form of manual processing in the past. Most motor processing manufacturers have used motor automatic assembly line in the production process. Due to the rising demand for equipment, the production efficiency of motor automatic assembly line is becoming higher and higher. How to make the motor automatic assembly line play a higher efficiency?
1. Detect current load of motor automatic assembly line
The motor load current of the motor automatic assembly line is detected, or the three-phase current balance is detected. If the maximum value of the two-phase current does not exceed the rated current value, the unbalanced currents should not exceed 10%. When the difference is large, the motor automatic assembly line may have short circuit, open circuit, reverse, etc., or there is a single-phase operation of the motor. When such a situation occurs, immediately stop the operation of the equipment, check the cause of the problem and solve it before running. The large-scale motor automatic assembly line will basically install an ammeter, so you can always know his current situation. If some parts of the small motor automatic assembly line do not have an ammeter, you can additionally install a clamp-type ammeter for testing.
2. Increase the power supply voltage frequency of the motor automatic assembly line
The overspeed operation of the motor automatic assembly line can increase the power supply voltage frequency of the equipment, or the auxiliary equipment can be used to test the motor automatic assembly line to increase the operating speed of the assembly line. In addition, a frequency conversion device can be used to increase the power supply frequency of the assembly line. The way to improve operation is to reduce the current or increase the armature terminal voltage. The increase in voltage is less than the rated voltage. Decreasing the current will steadily increase the operating speed of the assembly line. These are the methods that can improve the working efficiency of the motor automatic assembly line. After these operations, the working efficiency can be relatively improved, and the production can be accelerated and the production efficiency can be improved.