The application of the automatic armature production line effectively improves the production efficiency of the enterprise and reduces the production cost, and the product quality is also higher than the manual method. In order to allow the automatic armature production line to run longer, daily maintenance work is indispensable.
1. Maintenance and repair of transmission components
After the automatic armature production line is used for a period of time, the lubricating oil of each component will evaporate, which will not be balanced during operation, and noise may occur. At this time, it is necessary to add lubricating oil in time to avoid damage to the automatic armature production line due to insufficient lubricating oil.
2. Maintenance and repair of electrical equipment
Motor equipment is the core device of the production line. Avoid contact of the motor with water or other liquid organic compounds, which may cause motor failure. The maintenance of the governor is the same as the motor. The operator of the automatic armature production line needs to maintain the motor according to the technical manual.
3. Maintenance of line equipment
The oil in the gearbox of the automatic armature production line can generally be used for one quarter, use diesel or gasoline to clean the inside of the gearbox, and pay attention to adding lubricant in time. The main thing to note is that the lubricant can’t be added too much, it is easy to cause heat in the gear box, when the motor load is relatively high, there will be a trip phenomenon. Of course, there should not be too little, otherwise the gearbox will generate heat, noise and damage to the normal use of the gearbox.
Contact Production Line Manufacturer
Manager: Annie
Mob : 0086-15990591701
Website: www.nide-tech.com
Email :[email protected]
Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo, China