If the automatic motor assembly line pays more attention to daily maintenance during use, its service life can be effectively extended, and the operation of the rotor automatic assembly line will be more accurate.
1. When installing, disassembling and adjusting the rotating mechanism of the automatic motor assembly line, it is necessary to ensure that the center line of the automatic motor assembly line equipment is parallel to the gear center line, and the angle is adjusted appropriately to ensure that the entire automatic assembly of the rotor can be efficient. Orderly and smoothly.
2. Normally, check the maintenance and connection of each part in the automatic motor assembly line. If you find any looseness, you should tighten it immediately. When the connecting bolts of the assembly line equipment are squeezed, check the tightness. All connecting shafts should have cotter pins, and they must be fully opened to ensure the stable state of the main components.
3. In the assembly line, some parts that are easy to wear need to be replaced in time. If a malfunction is found during operation, the operation can only be continued after the malfunction is resolved, and the lubrication of the motor bearings must be maintained in good condition. In daily use of the automatic motor assembly line, it is necessary to frequently check whether the wires and cables of the assembly line are damaged. If it is found that the damaged parts should be bandaged or replaced in time, the automatic motor assembly line can be used for a longer time.