Various problems may be encountered during the operation of the automatic coil winding machine. If you want the automatic coil winding machine to achieve the best results, you must pay attention to some problems during operation.
1. Before starting the motor winding machine, the user must check whether the firmware, lubrication, power supply and electronic circuit of the automatic coil winding machine are in normal condition, especially in cold winter, the equipment can be warmed up before starting.
2. The operation steps of turning on and off the automatic coil winding machine must be performed in accordance with the given sequence.
3. Under normal operation, do not press the reset button or emergency stop button. If you press it accidentally, in order not to waste the wire, you need to manually control the return to the last winding reference point after power on.
4. During normal operation of the motor winding machine, it is not allowed to open the electrical drawer or remove the cover, otherwise accidents such as electric shock may occur.
5. When a failure occurs, the operator must pay attention to keeping the site, and truthfully explain the situation before and after the failure to the maintenance personnel in order to analyze the problem and find the cause of the failure.
6. Before the operator has obtained relevant approval, please do not change the parameters set by the motor winding machine manufacturer in the control system and components at will.