The motor winding machine is composed of various mechanical components, and each component plays its own role to complete the stator winding process. It is processing equipment with high degree of automation, complete functions and strong power. However, after the motor winding machine has been used for a period of time, some actions may be inaccurate.
1. The cable is no longer as neat as it was at the beginning
When this situation occurs, it is necessary to specifically analyze whether the temperature occurred during normal processing or after the product was debugged. If it is during normal processing, most of it is because of hardware problems. If it is the latter case, it is generally a problem with settings. Hardware problems are mainly caused by the loosening of tooling fixtures, loosening of the fastening screws of the wiring mechanism, or the excessive load of the stepping motor due to the lubrication problem of the wiring mechanism, and the out-of-step condition of the stepping motor causes the wiring failure neat.
2. The spindle parking position of the motor winding machine is not accurate
In most cases of such problems, it is because the brakes have failed, such as the brake pads of the equipment are loose, or because the brake pads are worn out for a long time. In addition, the setting of the braking time will also affect the certainty of the parking position. In this case, you need to replace the brake pads or reset the braking time according to the actual situation.
3. The number of winding coils of the motor winding machine is not accurate
If the calculation of the motor winding machine is not accurate, most of the cases are caused by the fault of the sensor or the controller, which causes the motor winding machine to not operate normally. In this case, it is best to contact the manufacturer of the motor winding machine directly Come for repair treatment.