Safety specification in high-speed operation of armature winder

 Industry information     |      Oct-Mon 01:57:th

The automatic armature winder is a kind of high-speed mechanical equipment. To ensure safe production, the operator must use the automatic armature winder equipment in a reasonable and standardized manner. Several common safety problems of automatic armature winder are mainly the occurrence of wire injury, twisting parabolic, and safety hazards caused by some incorrect operations.

armature winder motor coil

During the operation of the automatic armature winder, the state of high-speed routing has been maintained, and there must be mechanical heat and pulling force during this operation. If the operator touches during this process, it may cause burns or safety hazards of being cut by the wire. Therefore, the wire must not be touched during the operation of the automatic armature winder.

During the high-speed operation of the automatic armature winder, the main shaft is always running at high speed. If the parts loosen during this process, there will be a danger of high-speed throwing and injury. This is also a comparison of the automatic armature winder. Common security issues. Therefore, when designing tooling fixtures, we must pay attention to the anti-falling design, and fasten each part in time to avoid such situations.

To use the automatic armature winder safely, the standard operation and reasonable utilization of the operator must be observed. The safety training of the operator is usually emphasized to effectively avoid the safety problems of the automatic armature winder.


Contact Armature Winder Manufacturer

Manager: Annie

Mob : 0086-15990591701

Website: www.nide-tech.com

Email :[email protected]

Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo, China

Scan QR code access with mobile phone
Safety specification in high-speed operation of armature winder

Scan QR code access with mobile phone。