- Stator stack length：10--150mm
- Stator OD：Max. 160mm
- Stator ID：30~110mm
- Tooling traveling distance：Max.60mm
- Suitable wire material：copper/ aluminium wire
- Slot number：8~48slots
- Max. slot filling rate：80%
- Power：380V/50/60HZ 3Kw
- Machine weight：about 850kg
- Machine dimension：L1850*W650*1700mm
Automatic alternator Stator Coil Inserting Machine/ alternator motor coil insertion equipment
The automatic stator coil inserter is suitable for automobile car alternator motor,air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.
(2) Machine mainfunction and characteristic
The machine insert coil and wedge simultaneously, coil insertion is controlled by servo motor system, and wedge insertion by variable frequency motor.
It is controlled by HMI, and machine can diagnose breakdown automatically.
This machine is suitable for Polyester Film wedge roll material with fixed thickness and fixed width (width and thickness dimension is provided by customer)
The wedge feeding is by stepping motor,feeding length, cutting, forming, inserting slot number could be set.
Both copper wire and aluminium wire are applicable.
Production capacity ≤25s/set (exclude theman-hours for auxiliary work)
Primary qualification rate for copper wire≥98.5%, after rework, the rate ≥99.5%
Both wedging system and feeding system have pre-decelerating function.
This machine has alarm for material rubout.
Wire pushing height and stop time can beset in the HIM interface.
This machine has fixed foot and removable wheel.
Wedge should not be damaged, no burr in the surface, no movement or slide.
Slot paper should not be damaged, nomovement or slide. Copper wire should not be pull away from the paper.
The stator should not be deformation or stator lamination should not be upward.
(3）the winding inserting process
Scan QR code access with mobile phone。