Automatic 100T aluminum Rotor die casting machine ND-100T

 Tip: click on the picture to enlarge

Product model:ND-100T


Comparing with the conventional automatic die casting machine, Our automatic rotor die casting machine has following features.


(1) Advantage

a. labor cost saving, only one operator required, the alumium scrap automatic recycle.

b. safe, it is very easy for operator to run the machine, operator only need to press "start" button, no need to handling the heavy tooling which might occur body injury, and the machine has aluminium anti spatter design to prevent the aluminium liquid from spraying and cause injury.

c. Healthy, our machine doesn't need asbestine cup to keep the temperature and demould

d. Power saving, and tooling cost is much less and fast tooling changeover.

etc



(2)Machine main function and characteristic

  • Automatic get aluminium melt liquid, automatic loading and unloading the rotor.

  • Rotor loading: automatic pneumatic circularly pick up.

  • Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.

  • Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.

  • Automatic feed mold releasing agent, the feeding time and times can be set.

  • There is water cooling channel, helpful for reducing the mold temperature effectively.

  • Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.

  • Machine will alarm and stop working if out of material.

  • Failure will be automatic displayed and machine will alarm.

  • One person can take care of more than one machine.


(3)Technical Parameters

一、Specification
No.ItemUnit100T specification
1、Main cylinder:
1main cylinder mold   lock forceKN630
2main cylinder mold   lock travel mm400
2、Injecting cylinder:
1Injecting cyliner   travel mm150
2Injecting cylinder   injecting force KN400
3Injecting force(Min-Max)KN70-400
4capacityL25
5aluminum depot   OD(Max)mm100
6punching head OD(Max)mm100
7aluminum depot   capacity(Max)kg2
8Injection punching   head travel distancemm60
9cycle times15-20
10Rotor ODmmMax 100
11Rotor stack heightmmMax 100
3、Motor and pump:
1Pump motor powerKW7.5+7.5
2Divider motor powderKW1.5
3Oil pump (plunger   pump)L40Y+40Y
4、Machine dimesion:
1Main frame(L*W*G)mm 2000*2100*2700
2assembly of oil tank   and electric appliance(L*W*G)mm 2100*1500*1500
3turntable ODmm1000
5、Cooling pump specification:
1Submersible pump   powerKW1.5
2Submersible pump rate   of flowM3/H5
3Submersible pump   water pressureMPa0.4
Remark: the max   pressure of this machine is 25Mpa / Submersible pump  power 220/380V Optiona


Scan QR code access with mobile phone
Automatic 100T aluminum Rotor die casting machine

Scan QR code access with mobile phone。