Machine feature of rotor die casting machine
Automatic get aluminium melt liquid, automatic loading and unloading the rotor.
Rotor loading: automatic pneumatic circularly pick up.
Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.
Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.
Automatic feed mold releasing agent, the feeding time and times can be set.
There is water cooling channel, helpful for reducing the mold temperature effectively.
Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.
Machine will alarm and stop working if out of material.
Failure will be automatic displayed and machine will alarm.
One person can take care of more than one machine.
Comparing with the conventional die casting machine, Our automatic rotor die casting machine has following features.
a. labor cost saving, only one operator required, the alumium scrap automatic recycle.
b. safe, it is very easy for operator to run the machine, operator only need to press "start" button, no need to handling the heavy tooling which might occur body injury, and the machine has aluminium anti spatter design to prevent the aluminium liquid from spraying and cause injury.
c. Healthy, our machine doesn't need asbestine cup to keep the temperature and demould
d. Power saving, and tooling cost is much less and fast tooling changeover.
Apart from the rotor die casting machine, we supply full range machines for stator and rotor manufacturing, such as stator coil winding machine, coil inserting machine, rotor assembly line, rotor turning machine, ect.
1main cylinder mold lock forceKN400
2main cylinder mold lock travel mm300
1Injecting cyliner travel mm150
2Injecting cylinder injecting force KN300
5aluminum depot OD(Max)mm80
6punching head OD(Max)mm80
7aluminum depot capacity(Max)kg1
8Injection punching head travel distancemm55
10Rotor ODmmMax 80
11Rotor stack heightmmMax 90
3、Motor and pump：
1Pump motor powerKW7.5
2Divider motor powderKW0.2
3Oil pump (plunger pump)L40Y
2assembly of oil tank and electric appliance（L*W*G）mm
5、Cooling pump specification：
1Submersible pump powerKW1.1
2Submersible pump rate of flowM3/H3.5
3Submersible pump water pressureMPa0.4
Remark: the max pressure of this machine is 25Mpa / Submersible pump power 220/380V Optional