Product model：Z3XJ3-300/300F
This stator coil final forming is desiged with a turnover mechanism, it will be easy to load and unloading the stators, especially for the big or heavy stators.
(1) Machine main function and characteristic
This machine adopts whole hydraulic system and PCL program.
This machine can adjust the forming stack length by changing washer.
Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.
Production capacity ≤13s/set (exclude loading/unloading time)
Primary qualification rate ≥99.5%, after rework, the rate ≥99.9%
This machine adopts safety grating protection system. Operator need to stand when operating.
Machine adopts two hands simultaneously start button to ensure safety.
(2) Technical data
Stator ID: 30~110mm
Stator OD: Max. 160mm
Stack length: 20~150mm
Winding overhang range: 15--50mm
Displacement of cylinder: 20L/min
Power: 380V/50/60HZ 1.5KW
Machine weight: about 600kg
Machine dimension: L850*W1000*H2300mm
(3) Application
It is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.
The forming station
Scan QR code access with mobile phone。