Stator Winding Final Shaping Machine Z3XL1-150(160)

 Tip: click on the picture to enlarge

Product model:Z3XL1-150(160)


The stator forming machine is used to forming the stator winding after lacing process. The forming process is very easy. Once the start button is pressed, machine will automatically do the forming. 


(1)  Machine main function and characteristic

  • This machine adopts whole hydraulic system and PCL program.

  • This machine can adjust the forming stack length by changing washer.

  • Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.

  • Production capacity ≤13s/set (exclude loading/unloading time)

  • Primary qualification rate ≥99.5%, after rework, the rate ≥99.9%

  • This machine adopts safety grating protection system. Operator need to stand when operating.

  • Machine adopts two hands simultaneously start button to ensure safety. 

Stator Winding Final Shaping Machine.jpg

(2) Technical data

  • Stator ID: 30~110mm

  • Stator OD: Max. 160mm

  • Stack length: 20~150mm

  • Winding overhang range: 15--50mm

  • Power: 380V  50/60HZ   1.5KW

  • Displacement of cylinder: 20L/min

  • Machine weight: about 700kg

  • Machine dimension: L850*W1000*H2300mm


(3) Application

It is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.



Stator forming process



Stator Coil Winding Final Shaping Machine.jpg

Stator Winding forming Machine.jpg

automatic electric motor stator coil forming machine.jpg


Scan QR code access with mobile phone
Stator Winding Final Shaping Machine

Scan QR code access with mobile phone。