- Stator ID：30~110mm
- Stator OD：Max. 160mm
- Stator stack length：20~150mm
- Winding overhang：Max 45mm
- Displacement of cylinder：20F
- Power：380V/50/60HZ 3.75KW
- Machine weight：about 800Kg
- Machine dimension：(L)1200*(W)1400*(H) 2400mm
The coil forming machine is very easy to operate. Once put the stator in the working station, press the start button, machine will automatically do the forming process. The light curtain will protect the operator forming damage during machine running.
(1) Machine main function and characteristic
This machine adopts whole hydraulic system and PCL program.
This machine can adjust the forming stack length by changing washer.
This machine has five oil cylinders which work individually to expend inner coil, wrap outer coil and form hang over.
After forming, there is no copper wire enamel broken or wire snap. and coil OD and ID is close to the final forming dimension.
Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.
Production capacity ≤14s/set (exclude loading/unloading time)
Primary qualification rate ≥98.5%, after rework, the rate ≥99.5%
This machine adopts safety grating protection system. Operator need to stand when operating.
Machine adopts two hands simultaneously start button to ensure safety.
The motor stator coil forming machine is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.
The forming tooling is pressing down.
Scan QR code access with mobile phone。